Installation Instructions

Installinga7000SeriesZMasterMower
Seat
1.Tilttheseatframeup.
2.Installaspacerontoeachseatstud(Figure11).
g020560
4
Figure11
1.Newseat
3.Seatframe
2.Spacer4.Flangenut(5/16inch)
3.Installtheseattotheseatframewith4angenuts
(5/16inch)(
Figure11).
4.Plugtheharnessconnectorintotheseatswitchlocated
undertheseattowardsthefront.
5.Carefullylowertheseatdownandensuretheharness
doesnotgetpinched.
6.Movetheseattothefurthestrearposition.
7.Installtheplastictiestopreventthewireharnessfrom
beingpinched.
Installinga3000SeriesorInternational
5000and6000SeriesZMasterMower
Seat
1.Removetheplasticpackingcoversguardingtheseat
studs.
2.Installaspacer(Figure12).
3.Securetheseattotheseatframewith4angenuts
(5/16inch)(Figure12)
4.Torquethenutsto22.5ft.-lb.(30.5N-m).
g020672
4
Figure12
1.Seat3.Flangenut(5/16inch)
2.Seatplate4.Spacer
5.Plugtheharnessconnectorintotheseatswitchlocated
undertheseattowardsthefront.
6.Carefullylowertheseatdownandensuretheharness
doesnotgetpinched.
7.Movetheseattothefurthestrearposition.
8.Ensuretheharnessdoesnotgetpinched.
9.Installtheplastictiestopreventthewireharnessfrom
beingpinched.
10.Installtheseattothemachineframewiththepreviously
removednuts(
Figure13).
Note:Theseatmayneedtobetiltedtoallowaccess
tothethreading.
11.Torquethenutsto47.5N-m(35ft.-lb.).
g020558
Figure13
1.Harnessconnector
2.Flangenuts(3/8inch)
12.Forinternationalmachinesonly,installthehydraulic
unitshroudtothemachine(Figure14).
5