Operator's Manual

For60-and72-inchmowersonly,greasethehandle
pivot(Figure46).
g009229
Figure46
InspectingtheCollection
System
ServiceInterval:Aftertherst8hours
Every100hours
1.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKEDposition,andset
theparkingbrake.
2.Stoptheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Checktheuppertube,lowertube,bagger,and
theblowerassembly.
Note:Replacethesepartsiftheyarecracked
orbroken.
4.Checkthebaggerframe.
Note:Replaceanypartsthatarecrackedor
broken.
5.Tightenallnutsboltsandscrews.
AdjustingtheClosedDoor
for60-and72-inchMowers
1.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKEDposition,andset
theparkingbrake.
2.Stoptheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Withthedoorclosed,loosenthenutsandadjust
thestopboltssothatthecontactarmisstraight
upanddown(Figure47).
4.Adjustthelengthofthehingelinkstosothatthe
doorcompletelyclosesandreasonableforceis
onthehandle(Figure47).
Note:Lengthenthelinkstoreducetheforce.
Shortenthelinkstoincreasetheforce
Note:Makesurethatboththeleftandright
sidesareadjustedthesamedistance.Withthe
doorclosed,thelinksshouldbeslightlytightto
minimizerattling.
5.Tightenthenuts.
g009230
Figure47
1.Contactarm—straightup
anddown
3.Hingelinks
2.Stopbolt
34