Operator's Manual

7.Oncethe19mm(3/4inch)measurementhasbeen
achieved,marktheuppertubeontheoutsidewhere
therubbersealprotrudesout(Figure25).
Note:Thisismarkedtoensurethecorrectposition
fortheuppertubewhendrillingtheholesand
connectingtheupperandlowertubes.
Note:Therubbersealmustprotrudeoutfromthe
baggerhood.
Figure25
1.Uppertube3.Baggerhood
2.Rubbersealprotrudingout4.Markhereagainstthe
rubberseal
8.Installthelowertubeintotheuppertube(Figure26).
Figure26
1.Lowertube2.Uppertube
9.Slidethelowertubeontothebootandlatchthem
together(Figure27orFigure28).
Note:Thereisalatchonthetopandbottomofthe
blowerhousing.
Figure27
Twinbaggershown
1.Blowerassembly
3.Latch(twinbaggershown)
2.Lowertube
14