Installation Instructions

ManualsBrandsToro ManualsAttachments, Parts & AccessoriesToro 79030

FormNo.3377-665RevA

CargoCarrier

TimeCutter

SeriesRidingMower

ModelNo.79030

InstallationInstructions

Note:Ifyouhaveabagger,usethesameweightsfromthe

baggerforthecargocarrier.

Note:Ifyoudonothavetheweightsfromabagger,obtain

thecorrectweightkitfromanAuthorizedToroDealer.

Safety

DANGER

Enginescanbecomehotwhentheyareoperating.

Severeburnscanoccurfromcontactinghot

surfaces.

Allowengines,especiallythemufer,tocoolbefore

touching.

ThefollowinglistcontainssafetyinformationspecictoToro

productsandothersafetyinformationyoumustknow.

•Becomefamiliarwiththesafeoperationoftheequipment,

withtheoperatorcontrols,andsafetysigns.

•Useextracarewithattachments.Thesecanchangethe

operatingcharacteristicsandthestabilityofthemachine.

•Followthemanufacturer'srecommendationsforadding

orremovingwheelweightsorcounterweightstoimprove

stability.

•Donotusetheattachmentonsteepslopes.Aheavyload

couldcauselossofcontroloroverturnthemachine.

•Slowdownanduseextracareonhillsides.Turfconditions

canaffectthemachine'sstability.Useextremecaution

whileoperatingneardrop-offs.

•Keepallmovementonslopesslowandgradual.Donot

makesuddenchangesinspeed,directionsorturning.

•Theattachmentcanobstructtheviewtotherear.Use

extracarewhenoperatinginreverse.

•Usecarewhenloadingorunloadingthemachineintoa

trailerortruck.

•Keephandsandfeetawayfrommovingparts.Donot

makeadjustmentswiththeenginerunning.

•Stoponlevelground,disengagedrives,settheparking

brake,shutoffenginebeforeleavingtheoperator's

positionforanyreasonincludingemptyingthe

attachment.

•Ifyouremovetheattachment,removetheweights.

•Stoptheenginebeforeremovingtheattachment.

•Donotleavealoadintheattachmentforextended

periodsoftime.

•Frequentlycheckcomponentsandreplacewith

manufacturer'srecommendedparts,whennecessary.

SafetyandInstructionalDecals

Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaofpotential

danger.Replaceanydecalthatisdamagedorlost.

109-7076

127–0051

1.Maximumcarrierframe

loadislessthanorequal

to100lbs(45kg).

2.Warning—donotsitorride

onthecarrierframe;read

theOperator’sManual.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3377-665*A

Summary of content (4 pages)

PAGE 1
Form No. 3377-665 Rev A Cargo Carrier TimeCutter® Series Riding Mower Model No. 79030 Installation Instructions Note: If you have a bagger, use the same weights from the bagger for the cargo carrier. • Do not use the attachment on steep slopes. A heavy load Note: If you do not have the weights from a bagger, obtain the correct weight kit from an Authorized Toro Dealer. • Slow down and use extra care on hillsides. Turf conditions Safety • Keep all movement on slopes slow and gradual.
PAGE 2
Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. Tray mount assembly Tray Pin Support bracket Bolt (5/16 x 2-1/4) Flange nut (5/16 inch) Bolt (5/16 x 1 inch) Self tapping bolt (5/16 x 3/4 inch) Support rod Flat washer Hairpin cotter pin 1 1 1 1 2 4 2 2 2 2 2 Install the carrier. Installing the Carrier 5. Slide the end of the support rod, without the hole, into the key slot in the frame (Figure 2). 1.
PAGE 3
8. Slide the tray into the tray mount assembly and align the holes. Secure it with the pin and hairpin cotter pin (Figure 3). 1 2 3 g021 115 Figure 3 1. Tray mount assembly 3. Tray 2.
PAGE 4