Installation Instructions

FormNo.3373-580RevA
38inand42inFinishingKit
TwinSoftBaggerforXLSLawnTractor
ModelNo.79119
ModelNo.79121
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Chute
1Installthechute.
Baggerblades2Installtheblades
InstallingtheChute
RefertotheBaggerOperator’sManualforthecorrect
procedure.
InstallingtheBlades
1.Removethemower;refertoRemovingtheMowerin
thetractorOperator’sManual.
2.Carefullytipthemowerover.
3.Removethebladebolts,curvedwashers,retainers,and
blades(Figure1).Useablockofwoodasawedge
betweenthebladeandthemowertolocktheblade
whenyouareremovingthebolt.
Note:Savetheexistingbladeforusewhennotin
baggingmode.
g019510
6
6
Figure1
1.Bladebolt
4.Spindle
2.Retainer
5.Curvedwasher
3.Blade
6.Curvedpartoftheblade
(bladesail)
4.Inspectallparts;replaceanypartsthataredamaged.
5.Installthenewbaggerblades,bladeretainers,curved
washers(cuppedsidetowardblade),andtheblade
bolts(Figure1).
Important:Thecurvedpartoftheblade(blade
sail)mustbepointinguptowardtheinsideofthe
mowertoensurepropercutting.
6.Tightenthebladeboltto45to60ft-lb(61to81N-m).
7.Installthemower;refertoInstallingtheMowerinthe
tractorOperator’sManual.
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3373-580*A