Installation Instructions

ManualsBrandsToro ManualsAttachmentsLight Kit, TITAN Zero-Turn-Radius Riding Mower

Page 1 of 2

Part #109-6386 Rev. B

Kit # 109-6240

INSTRUCTION SHEET

LIGHT KIT

Parts List:

Item Part No. Description Qty.

1 109-6485-03 Wld, LH Light Mount.................................... 1

2 109-6489-03 Wld, RH Light Mount................................... 1

3 109-6488-03 Tube, Light Mount....................................... 2

4 103-6300 Light, 35Watt Halogen................................. 2

5 321-9 Screw, HH 1/4-20 x 1 1/2............................ 2

6 104-7201 Nut, Nyloc 1/4-20 Flg .................................. 2

7 104-8301 Nut, Nyloc 3/8-16 Flg .................................. 4

8 3234-12 Screw, HH FLG 3/8-16 x 3/4 ....................... 4

9 92-8875 Switch, Rocker............................................ 1

10 109-6500 Harness, Light Kit........................................ 1

11* 1-303335 Tie, Cable 7 15/16 (Large) .......................... 6

12 109-6708 Guard.......................................................... 2

13 3256-78 Washer ....................................................... 2

* Items not shown

Installation Instructions:

(Refer to Figure 1 for all item callouts and hardware)

This SAFETY ALERT SYMBOL

is used

both in this manual and on the machine to

identify important safety messages which must

be followed to avoid accidents. This symbol

means:

ATTENTION! BECOME ALERT!

YOUR SAFETY IS INVOLVED!

WARNING

POTENTIAL HAZARD

♦ While maintenance or adjustments are

being made, someone could start the

engine.

WHAT CAN HAPPEN

♦ Accidental starting of the engine could

seriously injure you or other bystanders.

HOW TO AVOID THE HAZARD

♦ Remove the key from the ignition switch

and/or pull the wire(s) off the spark plug(s)

before you do any maintenance. Also push

the wire(s) aside so it does not accidentally

contact the spark plug(s).

FIGURE 1

Summary of content (2 pages)

PAGE 1
INSTRUCTION SHEET LIGHT KIT Parts List: Item Part No. Description Qty. 1 2 3 4 5 6 7 8 9 10 11* 12 13 Wld, LH Light Mount.................................... Wld, RH Light Mount ................................... Tube, Light Mount ....................................... Light, 35Watt Halogen................................. Screw, HH 1/4-20 x 1 1/2 ............................ Nut, Nyloc 1/4-20 Flg .................................. Nut, Nyloc 3/8-16 Flg ..................................
PAGE 2
1. Tip seat forward. Routing Wire Harness 2. Remove hydro fan cover and hydraulic reservoir cap as shown in Figure 2. Note: Be sure unit is not running, key is removed from ignition switch, and parking brake is engaged prior to proceeding with the harness installation. 1. On both sides of the machine, route the harness up the light mount brackets and insert harness clips into mount holes on brackets as shown in Figure 1. Be sure the connectors are fully inserted on to the terminals.