Use and Care Manual

g201513
Figure26
1.Blowerpulley5.Idlerarm
2.Blowerinposition(housing
portionremovedfor
illustrativepurposes)
6.Drivepulley
3.Spring7.Idler/tensionpulley
4.Idler-pulleypost8.Blowerbelt
2.Ensurethatthebeltremainsaligneldtotheblower
pulleywhileyouareinstallingtheblowerassembly.
3.Pullthespringloadedidlerpulleyawayfromthexed
springpost,androutethebeltaroundthemowerdeck
pulley(Figure26).
Note:Ensurethatthebeltisroutedaroundtheblower
pulleycorrectly.
4.Routethebeltaroundthedrivepulleyasillustratedin
Figure25andFigure26.
5.Installthepoweredbaggercoveroverthebeltcover,
andsecureitbytighteningtheknob(Figure27).
g201515
Figure27
1.Knob3.Beltcover
2.Poweredbaggercover
12
InstallingtheDischarge
Tubes
Partsneededforthisprocedure:
1Uppertube
2
Screw(1/4x3/4inches)
2
Washer(1/4inch)
2
Locknut(1/4inch)
1Lowertube
Procedure
Important:Makesurethatthemowerdeckisinthe
lowestheight-of-cutpositionbeforeinstallingthe
dischargetubes.
Note:Remembertoinstallthegrassdeectorwhenyou
removethebaggerfromthemower.
1.DisengagethePTOandengagetheparkingbrake.
2.Shutofftheengineandremovethekey.
3.Lowerthemowerdecktothelowestheight-of-cut
position.
4.Removethebagsforviewingthetubeunderthehood.
5.Lowerandlatchthehood.
6.Usebothlatchestoattachthelowertubetotheblower
assembly(Figure28).
Note:Ensurethenotchinthelowertubeisatthe
bottomwheninstalled(Figure30).
16