Use and Care Manual

3
G018444
1
2
g018444
Figure28
LowerDischargeTubeLatch
1.Blowerassembly3.Latch
2.Upperlatch
7.Makenoteofwherethe2boltsintheuppertubeare
installed.
Note:Theholenearthemoldedarrowheadswillnot
beused.
8.Removethe2boltsinthelowerendoftheuppertube.
9.Usethe2holesasatemplateforthelowertube.
Note:Retainthehardware.
10.Inserttheupperend(noholes)oftheuppertube
throughthetubesealinthehoodbypushingthetube
inuntilthetubecontactstheinsideofthehood.
11.Pulltheuppertubeoutslightlysothatthesealextends
outwardandoverthelowertube(Figure29).
G018440
1
2
3
g018440
Figure29
1.Uppertube3.Baggerhood
2.Rubbersealprotrudingout
12.Aligntheuppertubeholestomatchthedimplesonthe
surfaceofthelowertube.
Note:Ensurethatthesideproleappearsasshown
inFigure30.
Note:Donotusetheopenholenearthemolded
arrowheads.
g020776
1 2
4 3
g020776
Figure30
1.Uppertube
3.Notchatthebottomofthe
tubewheninstalled
2.Existinghole(bolt
removed)
4.Lowertube
13.Usingtheexistingholesintheuppertubeasatemplate,
drill2holes,6.5mm(1/4inch)diameter,throughthe
dimplesonthelowertube(Figure31).
17