Use and Care Manual

G018439
4
2
3
3
1
6
5
g018439
Figure31
DrillingLowerDischargeTube
1.Dimples4.Uppertube
2.Lowertube
5.Installscrew(1/4x3/4
inch),washer(1/4inch),
andlocknut(1/4inch)
here.
3.Drill6.5mm(1/4inch)
diameterhole
6.Uppertube—existing
holes
14.Removetheupperandlowertubesfromthemachine.
15.Slidethetubestogetherandaligntheholes.
16.Installthewashers(1/4inch)ontothebolts(Figure
31).
17.Usingahexkeytool,installthescrews(1/4x3/4inch)
andwashers(1/4inch)fromtheinsideofthelower
tubeandthroughtheexistingholesintheuppertube
(Figure31).
18.Securethetubestogetherwiththenuts(1/4inch)as
showninFigure31.
19.Inserttheupperdischargetubethroughthetubeseal
inthehood.
20.Pulltheuppertubeoutslightlysothatthesealextends
outwardandovertheblowerassembly(Figure29).
21.Usebothlatchestoattachthelowertubetotheblower
assembly(Figure28).
18