Use and Care Manual

g243281
Figure4
1.Railguard2.Hex-washerheadscrew
(1/4x13/16inch)
2.Locatethefrontboltsontheundersideofthe
frame(Figure5andFigure6).
3.Removethe2bolts(3/8x1inch)and2locknuts
(3/8inch)asshowninFigure5andFigure6.
Retainthelocknuts.
g014875
Figure5
1.Front,rightcaster(caster
forkandwheelnotshown
forclarity)
3.Bolt(3/8x1inch)
2.Fronthole(rightside)4.Locknut(3/8inch)
g014877
Figure6
1.Locknut(3/8inch)3.Front,leftcaster(caster
forkandwheelnotshown
forclarity)
2.Fronthole(leftside)4.Bolt(3/8x1inch)
4.Locatetheleftandrightweight-mounting
bracketsinlooseparts.
5.Installtheleftbrackettotheundersideofthe
frameusing2bolts(3/8x1-1/4inches),2
washersand2locknuts(3/8inch)asshownin
Figure7.
Note:Onelocknutisfromloosepartsandthe
otherisusedfromearlierremoval.
g014878
Figure7
1.Existinglocknut(3/8inch)5.Existingholeintheframe
2.Forwardholeontheleft
side
6.Washer
3.Front,leftcaster(caster
forkandwheelnotshown
forclarity)
7.Bolt(3/8x1-1/4inches)
4.Locknut(3/8inch)from
looseparts
8.Leftmountingbracket
6