Use and Care Manual

6.Ontherightsideofthemachine,installtheright
weight-mountingbracketasfollows:
•Formachineswithoutafootassistliftpedal,
securethebracketusing2bolts(3/8x1-1/4
inches),2washersand2locknuts(3/8inch)
asshowninFigure8.
Note:Alocknutisfromloosepartsandthe
otherisusedfromearlierremoval.
g014876
Figure8
1.Front,rightcaster(caster
forkandwheelnotshown
forclarity)
5.Bolt(3/8x1-1/4inches)
2.Forwardholeontheright
side
6.Washer
3.Existinglocknut(3/8inch)7.Existingholeintheframe
4.Rightmountingbracket
8.Locknut(3/8inch)from
looseparts
Note:Formachineswithafootassistlift
pedal,thewashersarenotused.
•Formachineswithafootassistliftpedal,
Removetheforwardfastenersinthefoot
assistliftpedalbracketandsecurethe
bracketusing2boltsand2locknuts(Figure
9).
Note:Onelocknutisfromloosepartsand
theotherisusedfromearlierremoval.
g014883
Figure9
1.Front,rightcaster(caster
forkandwheelnotshown
forclarity)
5.Bolt(3/8x1-1/4inches)
2.Frontholeonrightside
6.Foot-assistliftpedal
bracket
3.Existinglocknut(3/8inch)
7.Existingholeinthebracket
4.Rightmountingbracket
8.Locknut(3/8inch)from
looseparts
7.Installtheweightbrackettothemounting
bracketsbyaligningtheoutboardholesinthe
bracketwiththemountingbracketsinstalled
previously(Figure10).
Note:Ensurethatthebracketiscenteredon
theframe.
8.Securetheweightbracketwith2bolts(3/8x
1inch)and2locknuts(3/8inch)asshownin
Figure10.
g014879
Figure10
1.Locknut(3/8inch)4.Bolt(3/8x1inch)
2.Weightbracket5.Rightmountingbracket
3.Leftmountingbracket
7