Owner's Manual

1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Disengagetheblade-controlswitch.
3.Movethemotion-controlleversoutwardtothe
NEUTRAL-LOCKpositiontoengagetheparking
brake.
4.Shutofftheengineandremovethekey.
2
InstallingtheWeights
Partsneededforthisprocedure:
4
Bolt(3/8x1inch)
6
Locknut(3/8inch)
1
Leftweight-mountingbracket
1Rightweight-mountingbracket
2Washer
2
Bolt(5/8x2-3/4inches)
6
Suitcaseweight
Procedure
Note:Thisprocedureisonlyformodelswithcontrol
levers.Steeringwheelmodelsdonotneedweights
installed.
CAUTION
Thebaggerchangestheweightdistributionof
themachine.Operatingthemachinewithout
thefrontweightsmaycauseanunstable
condition,whichcouldresultinalossof
control.
Ensurethefrontweightsareproperlyinstalled
beforeoperatingthemachinewiththebagger
attachment.
1.Installtheweight-mountingbracketstotheunder
sideoftheframeusing2bolts(3/8x1inch),
and2locknuts(3/8inch)asshowninFigure3.
2.Installthesuitcaseweightstotheweight
mountingbracketsusing2bolts(5/8x2-3/4
inches),2washers,and2locknuts(3/8inch)
asshowninFigure4.
3.Onceyouhaveinstalledalltheweightsand
brackets,ensurethatallthefastenersaretight.
Tightenasnecessary.
Important:Wheneveryouremovethe
baggerattachment,remembertoremovethe
frontweightstoreturntheproperstability
tothemachine.
g299192
Figure3
Castorforkandwheelnotshownforclarity.
1.Frontrightcaster4.Rightmountingbracket
2.Forwardhole(rightside
shown)
5.Bolts(3/8x1inch)
3.Locknut(3/8inch)
5