Operator's Manual

16
Problem Corrective ActionPossible Causes
Reduced bagging performance.
1. Low engine speed. 1. Always operate the collector at
full throttle.
2. Plugged fan screen. 2. Remove debris, leaves or grass
clippings from the fan screen.
3. Loose collector belt. 3. Check the collector belt
tension.
4. Broken seal between hopper
and rear door.
4. Ensure the rear door is latched.
5. A plugged boot. 5. Locate and remove plugged
debris.
6. Improper seal around the upper
tube going into the hopper.
6. Ensure that there is a good
seal at hopper.
7. Full hopper. 7. Empty hopper.
Boot and tubes plug too frequently.
1. Hopper is too full. 1. Dump more frequently.
gqy
2. Grass is too wet. 2. Cut grass when dry.
3. Grass is too long. 3. Cut the grass twice. Once in a
high height–of–cut and next in
a normal height.
4. Plugged fan screen. 4. Remove debris, leaves or grass
clippings from the fan screen.
5. Ground speed is to fast. 5. Drive slower at full throttle.
Debris blowout.
1. Hopper is too full. 1. Dump more frequently.
2. Ground speed is to fast. 2. Drive slower at full throttle.
3. Grass build up on slots in boot. 3. Drive slower at full throttle or
the collector is full.