Form No. 3432-868 Rev E Flex-Force Power System™ 60V MAX Battery Charger Model No. 81802—Serial No. 319000001 and Up Model No. 81805—Serial No. 320000001 and Up Model No. 81820—Serial No. 321000001 and Up Model No. 81825—Serial No. 319000001 and Up Model No. 81850—Serial No. 320000001 and Up Model No. 81860—Serial No. 319000001 and Up Model No. 81875—Serial No. 319000001 and Up Register at www.Toro.com.
Introduction This battery pack/charger is intended to be used by residential homeowners. Battery chargers Model 81802 and Model 81805 are designed to charge Toro Flex-Force lithium-ion battery pack Models 81820, 81825, 81850, 81860, and 81875. They are not designed to charge any other batteries. Using these products for purposes other than their intended use could prove dangerous to you and bystanders.
4. WARNING—Plugging the battery charger into an outlet that is not 100 to 240 V can cause a fire or electric shock. Do not plug the battery charger into an outlet other than 100 to 240 V. For a different style of connection, use an attachment plug adapter of the proper configuration for the power outlet if needed. 5. CAUTION—A mistreated battery pack may present a risk of fire or chemical burn. Do not disassemble the battery pack. Do not heat the battery pack above 68°C (154°F) or incinerate it.
. Do not expose a battery pack or battery charger to fire or to temperatures higher than 100°C (212°F). 5. Follow all charging instructions and do not charge the battery pack outside of the temperature range specified in the instructions. Otherwise, you may damage the battery pack and increase the risk of fire. 6. Under abusive conditions, the battery pack may eject liquid; avoid contact. If you accidently come into contact with the liquid, flush with water.
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal137-9496 137-9496 1. The battery pack is charging. 3. The battery pack is over or under the appropriate temperature range. 2. The battery pack is fully charged. 4. Battery pack charging fault decal137-9495 137-9495 1. Read the Operator’s Manual. 3. For indoor use. 2. Do not discard. 4.
decal144-6019 decal140-8486 144-6019 1. Read the Operator’s Manual. 2. Recycle the battery properly. 140-8486 4. Keep away from open fire or flames. 5. Do not expose to rain. 1. Read the Operator’s Manual. 2. Recycle the battery properly. 3. Contains lithium ions; do not dispose improperly. 3. Contains lithium ions; do not dispose improperly. 6 4. Keep away from open fire or flames. 5. Do not expose to rain.
decal140-8488 decal140-8490 140-8488 1. Read the Operator’s Manual. 2. Recycle the battery properly. 140-8490 4. Keep away from open fire or flames. 5. Do not expose to rain. 1. Read the Operator’s Manual. 2. Recycle the battery properly. 3. Contains lithium ions; do not dispose improperly. 3. Contains lithium ions; do not dispose improperly. 7 4. Keep away from open fire or flames. 5. Do not expose to rain.
decal140-8492 140-8492 1. Read the Operator’s Manual. 2. Recycle the battery properly. 4. Keep away from open fire or flames. 5. Do not expose to rain. 3. Contains lithium ions; do not dispose improperly. decal137-9461 137-9461 1.
Setup Mounting the Battery Charger (Optional) If desired, mount the battery charger securely on a wall using the wall-mount key holes on the back of the charger. Mount it indoors (such as a garage or other dry place), near a power outlet, and out of the reach of children. Refer to Figure 1 for assistance in mounting the charger. Slide the charger over the appropriately positioned hardware to secure the charger in place (hardware not included).
Product Overview Specifications Battery Charger Model 81802 81805 Type 60V MAX Lithium-Ion Battery Charger 60V MAX Lithium-Ion Battery Rapid Charger Input 100 to 240V AC 50/60Hz Max 2.0A 100 to 240V AC 50/60Hz Max 5.0A Output 60V MAX DC 2.0A 60V MAX DC 5.5A Battery Pack Model 81820 81825 81850 81860 81875 Battery pack capacity 2.0 Ah 2.5 Ah 4.0 Ah 6.0 Ah 7.5 Ah 108 Wh 135 Wh 216 Wh 324 Wh 405 Wh Battery manufacturer rating = 60V maximum and 54V nominal.
Operation Charging the Battery Pack Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, place the battery pack in the charger and charge it until the LED display indicates the battery pack is fully charged. Read all safety precautions. Important: Charge the battery pack only in temperatures that are within the appropriate range; refer to Specifications (page 10).
5. Refer to the following table to interpret the LED indicator light on the battery charger. Indicator light Indicates Off No battery pack inserted Green blinking Battery pack is charging Green Battery pack is charged Red Battery pack and/or battery charger is over or under the appropriate temperature range Red blinking Battery pack charging fault* *Refer to Troubleshooting (page 14) for more information. Important: The battery can be left on the charger for short periods between uses.
Maintenance Maintenance and servicing are not required under normal conditions. When you clean the surface of the equipment, wipe it only with a dry cloth. Do not disassemble the equipment; if it is damaged, contact your Authorized Service Dealer. Storage Important: Store the tool, battery pack, and charger only in temperatures that are within the appropriate range; refer to Specifications (page 10).
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The battery pack loses charge quickly. 1. The battery pack is over or under the appropriate temperature range. 1.
Problem The LED indicator light on the battery charger is blinking red. The tool does not run or does not run continuously. Possible Cause Corrective Action 1. There is an error in the communication between the battery pack and the charger. 1. Remove the battery pack from the battery charger, unplug the battery charger from the outlet, and wait 10 seconds. Plug the battery charger into the outlet again and place the battery pack on the battery charger.
EEA/UK Privacy Notice Toro’s Use of Your Personal Information The Toro Company (“Toro”) respects your privacy. When you purchase our products, we may collect certain personal information about you, either directly from you or through your local Toro company or dealer.
