SDS

_____________________________________________________________________________________________
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Lithium manganese oxide (LiMn2O4)
12057-17-9
TWA: 0.2 mg/m
3
Mn (vacated) Ceiling: 5 mg/m
3
Ceiling: 5 mg/m
3
Mn
IDLH: 500 mg/m
3
Mn
TWA: 1 mg/m
3
Mn
_____________________________________________________________________________________________
Methods for cleaning up
Pick up and transfer to properly labeled containers.
Revision Date 22-Jul-2015
1116425 - 88508 48v Battery
7. HANDLING AND STORAGE
Precautions for safe handling
Handling
In case of rupture. Handle in accordance with good industrial hygiene and safety practice.
Avoid contact with skin, eyes or clothing. In case of insufficient ventilation, wear suitable
respiratory equipment. Use only with adequate ventilation and in closed systems. Do not
eat, drink or smoke when using this product. Take off contaminated clothing and wash
before reuse.
Conditions for safe storage, including any incompatibilities
Storage
Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from
moisture. Store locked up. Keep out of the reach of children. Store away from other
materials.
Incompatible Products
Acids. Bases. Oxidizing agent.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Attention! Corrosive material. Avoid contact with skin, eyes or clothing. Ensure adequate
ventilation. Use personal protective equipment as required. Evacuate personnel to safe
areas. Keep people away from and upwind of spill/leak. ELIMINATE all ignition sources (no
smoking, flares, sparks or flames in immediate area). Do not touch or walk through spilled
material.
Other Information
Refer to protective measures listed in Sections 7 and 8. ELIMINATE all ignition sources (no
smoking, flares, sparks or flames in immediate area).
Environmental precautions
Environmental precautions
Prevent further leakage or spillage if safe to do so. Should not be released into the
environment. Do not allow to enter into soil/subsoil. Prevent product from entering drains.
Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so. Absorb with earth, sand or other
non-combustible material and transfer to containers for later disposal.
Page 5 / 14