Installation Instructions

FORM NO. 3315-935

The Toro Company1993 TPS

PART NO. 92-1295

INSTALLATION

INSTRUCTIONS

For Workman 3000 Series

SEAT BELT KIT

1. Remove capscrews and washers securing rear of

seat brackets to frame of machine.

2. Secure each end of seat belt assembly to seat belt

bracket as shown in figure 1, with a 7/16-20 x 1" lg.

capscrew and locknut. Bent tabs on bracket to face

forward and seat belt latch to be mounted on end of

bracket positioned toward outside of machine. Tighten

nuts securely.

3. Mount seat belt bracket to seat brackets and frame

with (2) 5/16-18 x 2" lg. capscrews, washers and

spacers. Spacers to be positioned between seat belt

bracket and seat brackets.

4. Secure assembly to underside of frame with (2)

washers and locknuts. Tighten nuts securely.

Figure 1

1. Seat belt latch

2. Seat belt bracket

3. Seat brackets

Passenger seat assembly shown

4. Bent tab

5. Spacer