FORM NO. 92-8243 PART NO, 92-8240 SET-UP AND PARTS CATALOG ROLLOVER PROTECTION STRUCTURE (TOPS) ADAPTER KIT FOR USE ON MULTI-PRO™ * * This Adapter Kit has been designed for use on the Multi-Pros listed below: MULTI-PRO 1100: Model No. 41101 Serial No. 20101 & Up MULTI-PRO 1100: Model No. 41105 Serial No. 30101 to 30370 MULTI-PRO 418: Stock No. 3258, Series 5223 Serial No.
7. Install TOPS as per 'TOPS SET-UP INSTRUCTIONS". See Form No. 92-3889. 8. Align the pivot tubes on the new Pump Pivot Peale with those on the TOPS Bar mounting plate. Insert the two clevis pins and secure with the hair pin cotters. See FIG. 3. 1. Rear TOPS Bar LH} 2. Spray Pump Pivot Plate 8. Clevis Pin 4. Hair Pin Loiters 5. TOPS Mounting Angle 6. TOPS Mounting Lug 9. Remove the Spray Pump, Spring Angle and Spring from the original Pump Pivot Plate. 10.
FRONT VIEW TOP VIEW OF FRAME 3/4 [4 mt 1/27 3/8" 23/8" # Con pik halloo 3 3 \ 11/2" LOCATE TOPS MOUNT ANGLE AND MOUNT LUI , FLUSH WITH OUTSIDE OF FRAME FOR WELD, 17/52" Dia GRIND WELD IF REC'D TO KEEP SURFACE FLUSH DRILL 4 HOLES 4 HOLES THIS WALL AS NOTED ABOVE GRIND FLUSH AFTER WELD TOPS MOUNT LUG 32-3767 = Ell i Cis > Bi FIELD GRIND EXISTING TOPS MOUNT ANGLE 92-3766 TIF (2 PLACES) 52 1/4 LEFT SIDE VIEW OF FRAME FIGURE 2
Noo Oty Description + Hair Pin Cotter | RAPS Courting Lug | FOPS Mounting Angle Part No. 3767 5| 228967 7152-786 Ref 602 TOPS ADAPTER KIT (92-8240) 1 1 1 Description Spacer, 3/810. x 3-1/2 Handle Pin Pump Pivot Plate : Clevis Pin | 292-3634 3192-377 442195 182 | Ref Part No.
