Installation Instructions

FORM NO. 3316–555

The TORO Company – 1997

TPS

INSTALLATION

INSTRUCTIONS

Groundsmaster

200 Series

PART NO. 92–9670

WEIGHT BRACKET KIT

CAUTION

Before servicing or making adjustments to the

machine, stop engine and remove key from

the switch.

1. Position weight bracket over left hopper frame rail

so front edge is 6–1/8” from front end of rail (Fig. 1).

2. Using weight bracket as a template, locate, mark

and drill (2) .344” dia. holes thru top wall of frame rail

Figure 1

1. Weight bracket

2. Hopper frame

6–1/8”

.344” Dia. (2)

3. Mount weight bracket to frame rail with (2) self

tapping screws supplied in weight bracket kit.

4. Mount weight(s) and angle bracket to weight

bracket with (2) capscrews and nuts supplied with

weight. Weight and angle bracket to be positioned as

shown in figure 2.

Figure 2

1. Weight

2. Angle bracket