Operator's Manual

2
6. Press down on front of traction pedal and check
travel. There should be approximately 3.50" clearance
between end of pedal and floor plate when pedal in
fully depressed (Fig. 4). Adjust pump control rod to
attain dimension.
Figure 4
1
2
1. End of pedal
2. Floor plate
3.50"
7. Mount footrest to footrest bracket and floor plate
with (2) carriage bolts and locknuts (Fig. 5).
Figure 5
1. Foot rest
2. Foot rest pad
1
2
8. Affix foot rest pad to top of foot rest (Fig. 5).