FORM NO. 3317-769 INSTALLATION INSTRUCTIONS L CE UPDATE KIT J GUARDIAN 72” RECYCLER® ( PART NO. 936640 TOR, A SAFETY AND INSTRUCTION DECALS THE FOLLOWING DECALS AND GUARDS ARE TO BE INSTALLED ON THE GUARDIAN 72” RECYCLER®. USE THE LOCATION DESCRIPTION LISTED BELOW TO DETERMINE THE CORRECT PLACEMENT ON THE PRODUCT. BEFORE INSTALLING DECALS, REMOVE OR THOROUGHLY CLEAN THE ENGLISH DECAL, AND APPLY THE APPROPRIATE TRANSLATED LANGUAGE VERSION IN ITS PLACE (OR OVER IT).
INNER GUARD DRIVE SHAFT 93-9960 1 RETAINING RING NYLON BUSHING INSERT LOCATION SHEET INTO OPERATOR’S MANUAL FOR OWNER'S REFERENCE. Note: Mounting holes and clinch nuts may already be in deck. MOUNT BAFFLES 1. Remove deck from traction unit, remove deck covers and turn deck over. 2. On each deck strap, inside front of deck, measure 1.12" from bottom fip of deck and scribe a fine the full length of each strap (Fig.1 & insert). 3.
SECURE DECK COVERS 5. Remove deck covers and drill {4) .531" dia. holes at locations marked. 1. Remove deck covers. 6. Install a clinch Putin each hole. 2. Using dimensions shown in figure 3 & 4, locate, Reinstall deck covers and secure each to deck with mark and drill a .438" dia. hole in each deck cover. flange head cap screw. 3. Reinstall each cover to deck. 4. Using each deck cover as a template, locate and mark hole locations in deck channel. Figure 2 1. Side deck baffle 2.