FORM NO. 3317-663 CE UPDATE KIT Romero Vac Naggers ~ Model No. 79203 ® INSTALLATION PART NO. 93-9257 INSTRUCTIONS Loose Parts Note: Use the chart below to identify parts used for assembly. DESCRIPTION QTy. USE Herod Bolt x 1/2" (13mm) Lock washer Washer 5/16” Decal package install belt cover hold-down install over existing decals Locate Hole in Lower Baffle 1. Cut-out hole location templates on page 3. 2. Flip up belt cover and position belt support template on top side of belt support (Fig. 1).
Installation Locate Hole in Belt Cover Install Belt Cover Hold-Down 1. Fold over tabs of belt cover template and 1. Flip up belt cover and position hex rod on top of position on top of belt cover (Fig. 2). lower battle (Fig. 3). Secure with lock washer and 5/16 x 13 mm bolt. Note: You may want to tape template in position so it will not move when 2. Flip belt cover down and secure to hex rod with marking hole location. washer and 5/16 x 13 mm bolt (Fig. 3). 2.
Installation Cut-out Templates Mark and Drill > + Fold Tabs Here /Bm Cover Template | 1 | Belt Cover Support Template Mark and Drill / 9 mm Hole