Installation Instructions

FORM NO. 3317–491

PART NO. 93–9450

INSTALLATION

INSTRUCTIONS

CE UPDATE KIT

ProLine 120 Model No. 30610

Loose Parts

Note: Use the chart below to identify parts used for assembly.

DESCRIPTION QTY. USE

Muffler guard

Bolt 5/16–18 x 1” (26mm)

Washer

Lock nut

Install muffler guard on left side of frame

Belt guard

Speed nut

Bolt 1/4–20 x 7/8” (22mm)

Install belt guard under seat over opening

Lock bracket

Control block

Bolt 1/4–20 x 3” (77mm)

Spacer

Washer

Lock nut

Knob

Install lift lock

PAGE 1
FORM NO. 3317–491 CE UPDATE KIT ProLine 120 Model No. 30610 PART NO. 93–9450 INSTALLATION INSTRUCTIONS Loose Parts Note: Use the chart below to identify parts used for assembly. DESCRIPTION QTY.
PAGE 2
Installation Muffler Guard Install Lift Lock 1. Align muffler guard with holes on left side of frame (Fig. 1). 1. Remove lower bolts from valve body. 2. 2. Secure to frame with (2) washers, (2) 26 mm bolts and lock nuts (Fig. 1). Place control block rod through valve body from inside (Fig. 3). 3. Place lift bracket slot over rod and install washer and knob (Fig. 3). 4. Slide washer and spacer onto 77 mm bolt. Place bolt through lift bracket hole, valve body and control block (Fig. 3).