Installation Instructions

1
FORM NO. 3317–495
PART NO. 93–9460
INSTALLATION
INSTRUCTIONS
  
       
Loose Parts
Note: Use the chart below to identify parts used for assembly.
DESCRIPTION QTY. USE
 
Bolt 5/16–18 x 3/4” (19mm)
Lock nut 5/16” thin
1
2
2
Install deflector baffle
 
Bolt 5/16–18 x 3/4” (19mm)
Lock nut 5/16” thin
1
5
5
Install front deflector
  
Bolt 5/16–18 x 1-1/4” (32mm)
Nut 5/16”
Lock nut 5/16” thin
1
1
1
1
Install belt guard hold down
Decal package 1 Replace existing decals of like shape
Install Deflector Baffle
1. Hold deflector baffle in position along front of
deflector, with large end toward the mower
(Fig. 1).
2. Line up inside edge with deflector edge and
space so it extends below as shown (Fig. 1).
3. Mark and drill (2) 9 mm holes in deflector
(Fig. 1).
4. Secure with 5/16–18 x 3/4 (9mm) bolts and thin
5/16 lock nuts (Fig. 1).
3
2041
2
1
4
16 mm
37 mm
Figure 1
1. Grass deflector
2. Deflector baffle
3. Bolt 5/16–18 x 3/4” (9 mm)
4. Lock nut 5/16” thin