Installation Instructions
THIS KIT FITS ALL TORO 1800 TOPDRESSERS
WITH SERIAL NUMBERS 50221 - 69999.
INSTALLATION PROCEDURE
1) Install support brackets (92-4592), as shown in
illustration, on both sides of topdresser.
2) Place brush guard assembly (92-4593) on
support brackets with the notch for the lift bracket
on top and toward the front. See note.
3) Attach hinge to brush guard assembly, then
position access flap (92-4594) and fasten to hinge.
4) Secure fasteners to following specifications:
Part No. Torque (in-lbs)
321-2 75
322-3 156
323-6 276
5) Install the four pieces of u-channel (92-4589)
equidistant across the front most edge of access
flap.
NOTE: If holes on brush guard appear not to align
with threads on support brackets, loosen fasteners
on support brackets before installing fasteners to
secure brush guard.
©
The TORO Company - 1995
All Rights Reserved
FORM NO. 01-502-1810
INSTALLATION
INSTRUCTIONS
PART NO. 93-9502
CE UPDATE KIT
1800 TOPDRESSER
92-4592
(Support Brackets)
3256-24(16)
92-4590
(Hinge)
3253-21(8)
323-6(8)
3256-24(16)
3253-21(8)
323-6(8)
92-4593
(Brush Guard)
92-4362
(Rear Lift Bracket)
3256-23(4)
3253-4(4)
92-4589(4)
92-4594
(Access Flap)
3256-22(8)
3253-3(8)
321-2(8)
322-3(4)