Installation Instructions

FORM NO. 3318-225

The TORO Company - 1995

TPS

INSTALLATION

INSTRUCTIONS

PART NO. 94-3663

WEIGHT KIT

For Reelmaster

2300 Traction Units

1. Disconnect negative and positive battery cables

from battery.

2. Remove (2) carriage screws and flange locknuts

securing battery hold down to rear frame and remove

hold down and battery. Discard fasteners.

3. Remove (3) capscrews, flatwashers and

grommets securing fuel tank to rear frame. Set fuel

tank aside. Retain flatwashers and grommets for

reinstallation.

4. Position (2) thinner weights and (1) or (2) thicker

weights on rear frame aligning mounting holes with

holes in frame.

5. Position fuel tank on weights aligning mounting

holes. Secure tank in position with (3) 3/8 -16 x 2.50"

lg. capscrews (3 weights) or (3) 3/8 -16 x 3.50" lg.

capscrews (4 weights) and flatwashers and grommets

previously removed.

6. Secure weights together with (3) 3/8 -16 x 2.25"

lg. carriage screws (3 weights) or (3) 3/8 -16 x 3.25" lg.

carriage screws (4 weights).

7. Reinstall battery and battery hold down. Secure

hold down to rear frame with (2) 3/8-16 x 1.50" lg.

washer head capscrews (3 weights) or (2)

3/8-16 x 2.50" lg. capscrews and flat washers

(4 weights).

8. Connect battery cables.

Figure 1

1. Fuel tank mounting screws

2. Battery hold down mounting screws

3. Weight mounting screws