Installation Instructions

SEE BACK OF PAGE FOR WIRING DIAGRAM
The following instructions detail the substitution of the new wiring harness, Part No. 95-0042, for the old
wiring harness, Part No. 01-606-0390.
44085, 44089
1. Part No. 95-0033 will connect to the single black terminal end of wiring harness, Part No. 95-0042, and
the yellow accessory terminal on the Kohler engine. The fuse, Part No. 95-0041, should be placed in holder
of Part No. 95-0033.
2. The grounding harness, Part No. 95-0036, should be replaced if showing signs of wear
(i.e. abrasions, cuts, etc.).
3. The wiring connections in the control box are shown in the owner’s manual.
44081, 44083
1. Substitute the wiring harness, Part No. 95-0042, for the wiring harness, Part No. 01-606-0390.
2. The grounding harness, Part No. 95-0036, should be replaced if showing signs of wear
(i.e. abrasions, cuts, etc.).
3. The wiring connections in the control box are shown in the owner’s manual.
©
The TORO Company - 1995
All Rights Reserved
FORM NO. 95-0040
INSTALLATION
INSTRUCTIONS
Replacement for 01-606-0390
WIRING HARNESS REPLACEMENT
MODEL PARTS REQUIRED
44081, 44083 95-0036 Harness - Ground
95-0042 Wiring Harness - Control Box
44085, 44089 95-0033 Wire - Power, Engine
95-0036 Harness - Ground
95-0041 Fuse 3 Amp
95-0042 Wiring Harness - Control Box