Installation Instructions

FORM NO. 3319-626

INSTALLATION

INSTRUCTIONS

PART NO. 98-2393 & 98-2394

SWITCH KIT

Loose Parts

Note: Use the chart below to identify parts used for assembly.

DESCRIPTION QTY. USE

Bracket

Switch

Screw#4-40 x 1-1/4” (32 mm)

Nut #4–40

Adapter wire

Install replacement switches

Decal 1 Install on rear of tractor hood

Install Switch Kit

(Part No. 98-2393)

1. Remove existing switch from tractor, discard.

2. Align (2) switches inside of bracket as shown

(Fig. 1).

3. Secure switches to bracket with (2)

#4–40 x 1-1/4” (32 mm) screws and (2) #4–40

nuts (Fig. 1).

4. Plug adapter wire onto switch terminals (Fig. 1).

5. Mount bracket in tractor in place of previously

removed switch.

6. Connect adapter wire terminals to tractor wire

harness. Wide terminals to wide connectors and

narrow terminals to narrow connectors.

m–3998

Figure 1

1. Bracket

2. Switch

3. Screw #4–40 x 1-1/4”

(32 mm)

4. Nut #4–40

5. Adapter wire

PAGE 1
FORM NO. 3319-626 SWITCH KIT INSTALLATION INSTRUCTIONS PART NO. 98-2393 & 98-2394 Loose Parts Note: Use the chart below to identify parts used for assembly. DESCRIPTION QTY. Bracket 1 Switch 2 Screw#4-40 x 1-1/4” (32 mm) 2 Nut #4–40 2 Adapter wire 1 Decal 1 Install Switch Kit (Part No. 98-2393) 1. Remove existing switch from tractor, discard. 2. Align (2) switches inside of bracket as shown (Fig. 1). 3.
PAGE 2
Install Switch Kit (Part No. 98-2394) 1. Remove existing switch from tractor, discard. 2. Align (2) switches outside of bracket as shown (Fig. 2). 3. Secure switches to bracket with (2) #4–40 x 1-1/4” (32 mm) screws and (2) #4–40 nuts (Fig. 2). 2 3 5 1 4 m–3999 Figure 2 4. Plug adapter wire onto switch terminals (Fig. 2). 5. Mount bracket in tractor in place of previously removed switch. 1. Bracket 2. Switch 3. Screw #4–40 x 1-1/4” (32 mm) 6.