Installation Instructions



The T

oro Company – 1998

Printed in USA

FORM NO. 3321–827

INSTALLATION

INSTRUCTIONS

Part No. 99–0281

Shear Bolt Kit

Out Front Z

Loose

Parts

Note: Use the chart below to identify parts for assembly.

DESCRIPTION QTY. USE

Spacer

Replace spacer (as required)

Shear Bolt

Lock Nut

Install new shear bolt

PAGE 1
FORM NO. 3321–827 Shear Bolt Kit Out Front Z Part No. 99–0281 INSTALLATION INSTRUCTIONS Loose Parts Note: Use the chart below to identify parts for assembly. DESCRIPTION QTY.
PAGE 2
Installation Instructions Checking blade movement 1. Disengage the power take off (PTO), set the parking brake, and turn the ignition key to “OFF” to stop the engine. Remove the key. 2. Flip up deck and lock into vertical position. 3. Remove shear bolts (Fig.1). Note: 4. 5. Do not remove blade bolt when checking blade movement. Repeat this procedure for second blade. 1. Remove blade bolt. 2. Remove old spacer and replace with new spacer (Fig.1). 3. Reinstall blade bolt.