Installation Instructions



The T

oro Company – 1998

Printed in USA

FORM NO. 3322–267

INSTALLATION

INSTRUCTIONS

Part No. 99–0285

Fork

ension Kit

Out Front Z

Loose

Parts

Note: Use the chart below to identify parts for assembly.

DESCRIPTION QTY. USE

Fork

Nut (from existing assembly)

Wheel (from existing assembly)

ashers (from existing assembly)

Bolt (from existing assembly)

Spacer (from existing assembly)

Install Caster Wheel

Cap

ashers (from existing assembly)

1/2” Spacer

1” Spacer (from existing assembly)

Caster Wheel Assembly

Install Caster Wheel Assembly

PAGE 1
FORM NO. 3322–267 Fork Tension Kit Out Front Z Part No. 99–0285 INSTALLATION INSTRUCTIONS Loose Parts Note: Use the chart below to identify parts for assembly. DESCRIPTION QTY.
PAGE 2
Installation Instructions Remove Existing Caster Wheel Assembly 1. Disengage the power take off (PTO), set the parking brake, and turn the ignition key to “OFF” to stop the engine. Remove the key. 2. Flip up deck and lock into vertical position. 3. Remove existing hardware and caster wheel assembly from deck frame. 1 2 3 5 4 6 Note: Keep three washers and the 1” spacer. These parts are to be used with new assembly. 4 Remove and install Caster Wheel 1. 2.