Operator's Manual

Printed in the USA

 1986, 2001 by The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

Wheel Weight Kit

Groundsmaster



117

Part No. 56–6620

Part No. 99–5890

Form No. 3312–808 Rev A

Note: If unit is equipped with the optional Brake Kit, refer

to the Brake Kit Installation Instructions for additional

information on mounting of wheel weights.

1. Remove cap from valve stem and install valve stem

extension.

2. Slide wheel weight onto mounting position over valve

stem, aligning weight with (2) mounting holes in

wheel.

3. Secure weight to wheel with (2) 5/16–18 x 4” lg.

capscrews and flat washers.

4. Repeat procedure on opposite wheel.