Use and Care Manual

ManualsBrandsToro ManualsMiscellaneous PartsPUC Wireless Hour Meter for Toro Outdoor Power Equipment

FormNo.3424-589RevA

PUCHourMeter

ModelNo.99982

InstallationInstructions

Installation

InstallingthePUC

2x2x1x

Note:Toensurethattheadhesivewillstick,installthePUCintemperaturesof10°C(50°F)orhigher.

1.LocationofPUCinstallation:

•ZeroTurnMower:ontheleftsideoftheenginemountingplate.

•PushMower:onthedeckontheoppositesideofthefuelcap.

•SingleStageSnowthrower:ontheplastichousingontheoppositesideofthefuelcap.

•TwoStageSnowthrower:onthemetalhousing.

2.Cleanthelocationwiththecleaningwipes.

g259359

Figure1

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3424-589*A

Summary of content (4 pages)

PAGE 1
Form No. 3424-589 Rev A PUC Hour Meter Model No. 99982 Installation Instructions Installation Installing the PUC 2x 2x 1x Note: To ensure that the adhesive will stick, install the PUC in temperatures of 10°C (50°F) or higher. 1. Location of PUC installation: • Zero Turn Mower: on the left side of the engine mounting plate. • Push Mower: on the deck on the opposite side of the fuel cap. • Single Stage Snowthrower: on the plastic housing on the opposite side of the fuel cap.
PAGE 2
3. Remove the plastic cover from the mounting-clip adhesive. g259356 Figure 2 4. Install the mounting clip. g259360 Figure 3 5. Remove the battery tab from the PUC assembly.
PAGE 3
6. Install the PUC. g259361 Figure 5 7. Install the MyToro app. 8. Pair your PUC with your Toro product. A. Open the MyToro app. B. Select the MENU icon C. Select the PUC MANAGEMENT option. D. Select SCAN. E. Select ASSIGN and select the machine that you want to pair with the PUC. Operation Remove the PUC before washing your machine. Syncing the PUC Data Note: To save battery life, the PUC does not automatically sync with your smartphone. 1. Open the MyToro app. 2.
PAGE 4
Changing the Battery Battery: CR2450 Note: The MyToro app will show the battery life. Sync the PUC with your smartphone to get the most current information; refer to Syncing the PUC Data (page 3). 1. Remove the PUC from the mounting clip. 2. Insert a slot headed screwdriver into the slot and pry apart the 2 pieces of the PUC assembly. g259398 Figure 6 3. Remove the battery from the top of the PUC assembly. 4. Place the new battery into the PUC assembly. 5.