Operator's Manual

2.Parkthemachineonalevelsurface,engagethe
parkingbrakeandlowerthearms.
3.Shutofftheengine,removethekeyandallow
theenginetocool.
4.Turnthebattery-disconnectswitchtotheoff
position;refertoyourmachineOperator’s
Manual.
5.Ifyourmachinedoesnothavea
battery-disconnectswitch,disconnectthe
negative(black)cablefromthebattery,then
disconnectthepositive(red)cable(Figure4).
g029753
Figure4
WARNING
Incorrectbatterycableroutingcould
damagethemachineandcables,causing
sparks.Sparkscancausethebattery
gassestoexplode,resultinginpersonal
injury.
•Alwaysdisconnectthenegative
(black)batterycablebefore
disconnectingthepositive(red)
cable.
•Alwaysconnectthepositive(red)
batterycablebeforeconnectingthe
negative(black)cable.
2
InstalltheConnectorand
ConnectorMountBracket
Partsneededforthisprocedure:
1
Connectormountbracket
17-pinconnector
2
Bolt(5/32inches)
2
Spacer
2
Nut(5/32inches)
Procedure
1.Releaseanybuiltuphydraulicpressureby
movingtheauxiliaryhydraulicsleverforward
andbackwardafewtimes.
2.Disconnecttherightsideouterhosetting
(1–1/8inches)fromthebulkheadcouplerand
plugthehoseend.
g242258
Figure5
1.Hosetting
3.Bulkheadcouplerlocknut
2.Bulkheadcouplerthreads
3.Removethebulkheadcouplerlocknut(1–5/16
inches).
4.Aligntheconnectormountbracketoverthe
threadedendofthebulkheadcouplerand
secureitwiththebulkheadcouplerlocknut.
7