Operator's Manual

g242236
Figure6
1.Bulkheadcouplerlocknut
2.Connectormountbracket
5.Removetheplugandconnectthehosetting
removedinstep2.T orquethettingto60to74
ft-lb(81to100N·m).
6.Removethegrommetandplugnutfromtherear
ofthe7-pinconnector,aswellasthepartsbag
insidetheconnector.
7.Installthe7-pinconnectortothetopofthe
connectormountbracketwith2bolts(5/32
inches),washers,andnuts(Figure7).Tighten
thenutssecurely.
g242253
Figure7
1.7-pinconnector
3.Connectormountbracket
2.Bolt(washerandnuton
undersideofbracket)
3
ConnectingtheLoaderArm
Branch
Partsneededforthisprocedure:
1Relayandloaderarmharness
1Plugnut
Grommet
1Wireharnessretainer
2
Screw
Procedure
1.Loosenthecaptivescrew(7/16inch)onthe
bottomrightoftherear-accesscoverandopen
it(Figure8).
g031217
Figure8
1.Captivescrew
2.Alongthetoprailoftherightloaderarm,remove
the2screws,hosehold-downplates,and
spacertubes(Figure9).
8