Design Guide

Design Procedures
Designing a System
Try designing your own dripline system using the diagram shown
below and the tables and information provided in the remainder of
this section. When you have finished the design worksheet, check
your answers on page 17 at the end of this section.
1
23
Property
Line
Flat, Sandy Soil Area
Is In Constant Shade
Flat, Sandy Soil F35% Slope,
Clay Soil
Exposed When
Contractor Cut
Into Hill To
Place The House
50’
Sunny,
Clay Soil,
Grass
Sunny,
Flat,
Sandy
Shady,
Sandy Soil,
Sandy
Property
Line
Point Of
Connection
P. O.C
_____________________________________________________________Landscape Dripline Design
Typical Design Procedures
Design a typical dripline installation for zone #1
where the width is 5’ and the length is 50’.
Allowable Water Supply = 15 GPM
Dynamic Pressure = 45 PSI
Regulated Dynamic Pressure = 25 PSI
Fig. 1
9