Design Guide

System
Components
DL2000® Drip Tubing
Specifications
Minimum operating pressure: 15 PSI
Maximum operating pressure: 60 PSI
Coefficient of variance (Cv):
pressure compensating: < .05
non-pressure compensating: .03
Emitter outlet: Dual/opposing
Emitter flow @ 20 PSI:
RGP-2XX-XX 0.53 GPH
RGP-4XX-XX 1.02 GPH
Emitter spacing:
RGX-X12-XX 12”
RGX-X18-XX 18”
Maximum length of run:
RGP-212-XX 360’ @ 25 PSI
460’ @ 40 PSI
RGP-412-XX 240’ @ 25 PSI
300’ @ 40 PSI
RGP-218-XX 515’ @ 25 PSI
650’ @ 40 PSI
RGP-418-XX 340’ @ 25 PSI
430’ @ 40 PSI
Dimensions (L x I.D x O.D.):
RGP-XXX-01 100’ x .620” x .710”
RGP-XXX-05 500’ x .620” x .710”
RGP-XXX-10 1000’ x .620” x .710”
Weight:
RGP-XXX-01 4 lbs.
RGP-XXX-05 20 lbs.
RGP-XXX-10 45 lbs.
Drip In® Drip Tubing
Specifications
Minimum operating pressure: 15 PSI
Maximum operating pressure: 60 PSI
Coefficient of variance (Cv):
• pressure compensating: < .05
• non-pressure compensating: .03
Emitter outlet: Dual/opposing
Emitter flow @ 20 PSI:
• T-PCB1853-XX-XXX 0.53 GPH
• T-PCB1810-XX-XXX 1.02 GPH
Emitter spacing:
• T-PCB18XX-12-XXX 12”
• T-PCB18XX-18-XXX 18”
Maximum length of run:
• T-PCB1853-12-XXX 3
60’ @ 25 PSI
460’ @ 40 PSI
• T-PCB1810-12-XXX 240’ @ 25 PSI
300’ @ 40 PSI
• T-PCB1853-18-XXX 515’ @ 25 PSI
650’ @ 40 PSI
• T-PCB1810-18-XXX 340’ @ 25 PSI
430’ @ 40 PSI
Dimensions (L x I.D x O.D.):
• T-PCB18XX-XX-100
100’ x .620” x .710”
• T-PCB18XX-XX-250
250’ x .620” x .710”
• T-PCB18XX-XX-500
500’ x .620” x .710”
Weight:
• T-PCB18XX-XX-100 4 lbs.
• T-PCB18XX-XX-250 9 lbs.
• T-PCB18XX-XX-500 20 lbs.
Plastic Y-Filters
Specifications
Screen mesh size: 150 mesh
Screen material: Stainless steel
Maximum pressure: All models 142 PSI
Maximum flow rate:
T-ALFS75150-L 25 GPM
T-ALFS10150-L 35 GPM
Body dimensions (L x W x D):
T-ALFS75150-L:
9” x 7.32” x 4.29”
T-ALFS10150-L:
9” x 7.32” x 4.29”
Inlet/outlet size:
T-ALFS75150-L 3⁄4” MIPT
T-ALFS10150-L 1” MIPT
Landscape Dripline Design _____________________________________________________________
System Components Specifications
40