Design Guide

_____________________________________________________________Landscape Dripline Design
■ Recommended Installation Instructions
Automatic Flush Valve
Automatic Flush Valve
Detail No.13
Detail No.14
29
1. 1” ABOVE FINISH GRADE.
2. FINISH GRADE.
3. TORO FLUSH VALVE (T-FCH-H-FHT).
4. TORO LOC-EZE X 3/4” MHT ADAPTER
(T-FJA16).
5. TORO BLUE STRIPE POLY TUBING
(T-EHD1645-XXX).
6. TORO DRIPLINE OR BLUE STRIPE POLY
TUBING (T-EHD1645-XXX).
7. 6” ROUND PLASTIC VALVE BOX. HEAT BRAND
“AR” ON LID IN 1” HIGH CHARACTERS.
8. TORO LOC-EZE ELBOW (T-FEE16).
9. BRICK SUPPORTS (2 COMMON BRICKS
REQUIRED).
10. NATIVE SOIL PER SPECIFICATIONS.
11. PEA GRAVEL SUMP (6” DEEP).
USE ONE FLUSH VALVE FOR EVERY 7 GPM PER
ZONE. LOCATE AT LOW POINTS. FLUSH RATE IS
0.8 GPM. FLUSH PRESSURE IS 2 PSI.
1. 1” ABOVE FINISH GRADE.
2. NATIVE SOIL PER SPECIFICATIONS.
3. FINISH GRADE.
4. TORO FLUSH VALVE (T-FCH-H-FIPT).
5. 6” ROUND PLASTIC VALVE BOX. HEAT BRAND
“AR” ON LID IN 1” HIGH CHARACTERS.
6. 3/4” SCH 80 PVC NIPPLE
(LENGTH AS REQUIRED).
7. BRICK SUPPORTS (2 COMMON BRICKS
REQUIRED).
8. PEA GRAVEL SUMP (6” DEEP).
9. PVC ELBOW (SxT) WITH 3/4” THREADED
OUTLET.
10. PVC PIPING.
USE ONE FLUSH VALVE FOR EVERY 7 GPM PER
ZONE. LOCATE AT LOW POINTS. FLUSH RATE IS
0.8 GPM. FLUSH PRESSURE IS 2 PSI.