Design Guide

Landscape Dripline Design _____________________________________________________________
■ Recommended Installation Instructions
End-Feed Layout
Center-Feed Layout
Detail No.15
Detail No.16
30
1. AUTOMATIC FLUSH VALVE (T-FCH-H-FIPT)
PLUMBED TO FLUSH MANIFOLD AT
LOW POINT.
2. PVC FLUSH MANIFOLD.
3. MANIFOLD-TO-ELBOW CONNECTION (TYP).
4. PVC LATERAL LINE FROM DRIP ZONE KIT.
5. PVC SUPPLY MANIFOLD.
6. MANIFOLD-TO-TEE CONNECTION.
7. DRIPLINE LATERAL.
8. AIR/VACUUM RELIEF LATERAL, TORO BLUE
STRIPE POLY TUBING (T-EHD1645-XXX)
CENTERED ON MOUND OR BERM.*
9. AIR/VACUUM RELIEF VALVE (T-YD-500-34)
PLUMBED TO TORO BLUE STRIPE POLY
TUBING (T-EHD1645-XXX) AT EACH
HIGH POINT.*
10. PERIMETER LATERALS 2” TO 4” FROM EDGE.
11. AREA PERIMETER.
12. DL2000 OPERATION INDICATOR
(T-DL-MP9), OPTIONAL.*
* ONLY REQUIRED ON SUBSURFACE
INSTALLATIONS
1. PVC LATERAL LINE FROM DRIP ZONE KIT.
2. PVC SUPPLY MANIFOLD.
3. MANIFOLD-TO-ELBOW CONNECTION (TYP).
4. DRIPLINE LATERAL.
5. AIR/VACUUM RELIEF VALVE (T-YD-500-34)
PLUMBED TO TORO BLUE STRIPE POLY
TUBING (T-EHD1645-XXX) AT EACH
HIGH POINT.*
6. AIR/VACUUM RELIEF LATERAL, TORO BLUE
STRIPE POLY TUBING (T-EHD1645-XXX)
CENTERED ON MOUND OR BERM.*
7. PVC FLUSH MANIFOLD.
8. PERIMETER LATERALS 2” TO 4” FROM EDGE.
9. AREA PERIMETER.
10. DL2000 OPERATION INDICATOR
(T-DL-MP9), OPTIONAL.*
11. AUTOMATIC FLUSH VALVE (T-FCH-H-FIPT)
PLUMBED TO FLUSH MANIFOLD AT
LOW POINT.
* ONLY REQUIRED ON SUBSURFACE
INSTALLATIONS