Design Guide

_____________________________________________________________Landscape Dripline Design
■ Recommended Installation Instructions
Detail No.20
Detail No.21
Island Layout
End Feed
Island Layout
33
1. PVC LATERAL LINE FROM DRIP ZONE KIT.
2. PVC SUPPLY MANIFOLD.
3. PVC TEE (SxSxS).
4. PVC ELBOW (SxS).
5. TORO LOC-EZE ELBOW (T-FEE16).
6. TORO LOC-EZE TEE (T-FTT16).
7. TORO BLUE STRIPE POLY TUBING
(T-EHD1645-XXX) AT SUPPLY AND FLUSH
END OF EACH ISLAND
8. TORO LOC-EZE TEE X 1/2” SLIP ADAPTER
(T-FTV16).
9. AIR/VACUUM RELIEF VALVE (T-YD-500-34)
PLUMBED TO TORO BLUE STRIPE POLY
TUBING (T-EHD1645-XXX) AT EACH
HIGH POINT.*
10. DRIPLINE LATERAL
11. AUTOMATIC FLUSH VALVE (T-FCH-H-FIPT)
PLUMBED TO FLUSH MANIFOLD AT
LOW POINT.
12. DL2000 OPERATION INDICATOR
(T-DL-MP9), OPTIONAL.*
13. ISLAND PERIMETER.
14. PERIMETER LATERALS 2” TO 4” FROM EDGE.
* ONLY REQUIRED ON SUBSURFACE
INSTALLATIONS
1. AUTOMATIC FLUSH VALVE (T-FCH-H-FIPT)
PLUMBED TO FLUSH MANIFOLD AT
LOW POINT.
2. PVC FLUSH MANIFOLD.
3. TORO DL2000 OPERATION INDICATOR
(T-DL-MP9), OPTIONAL.*
4.MANIFOLD-TO-ELBOW CONNECTION (TYP).
5. TORO DRIPLINE LATERAL.
6. AREA PERIMETER.
7. PERIMETER LATERALS 2” TO 4” FROM EDGE.
8. PVC LATERAL LINE FROM DRIP ZONE KIT.
9. TORO LOC-EZE TEE (T-FTT16).
10. PVC SUPPLY MANIFOLD.
11. AIR/VACUUM RELIEF VALVE (T-YD-500-34)
PLUMBED TO SUPPLY MANIFOLD AT
HIGH POINT.*
*ONLY REQUIRED ON SUBSURFACE
INSTALLATIONS