Design Guide

DL2000® Flushing Cap
Specifications
■ Part Number: T-CEFCH-H
■ Sealing pressure: 2 PSI
■ Flush rate: 0.8 GPM
■ Maximum operating pressure: 50 PSI
■ Outlet size: .710” O.D. compression
■ Body dimensions (L x W x D):
3.425” x 1.340” x 1.340
■ Weight: 0.8 oz.
DL2000 Pressure Regulators
Specifications
■ Flow rate:
• T-PMR15-LF 1⁄10 - 8 GPM
(6 - 480 GPH)
• T-PMR25-LF 1⁄10 - 8 GPM
(6 - 480 GPH)
• T-PMR25-MF 2 - 20 GPM
(120 - 1200 GPH)
• T-PR25-HF 10 - 32 GPM
(600 - 1920 GPH)
• T-PMR40-MF 2 - 20 GPM
(120 - 1200 GPH)
■ Pressure regulation:
• T-PMR15-XX 15 PSI +/- 6%
• T-PMR25-XX 25 PSI +/- 6%
• T-PMR40-XX 40 PSI +/- 6%
■ Maximum pressure:
• T-PMRXX-XX 150 PSI
• T-PR25-HF 95 PSI
■ Body dimensions (L x W x D):
• T-PMR15-LF 4.60” x 2.16” x 2.16”
• T-PMR25-LF 4.60” x 2.16” x 2.16”
• T-PMR25-MF 5.15” x 2.50” x 2.50”
• T-PR25-HF 5.54” x 2.92” x 2.92”
• T-PMR40-MF 5.15” x 2.50” x 2.50”
■ Inlet/outlet size:
• T-PMR15-LF 3⁄4” FIPT
• T-PMR25-LF 3⁄4” FIPT
• T-PMR25-MF 3⁄4” FIPT
• T-PR25-HF 1” FIPT
• T-PMR40-MF 3⁄4” FIPT
■ Weight:
• T-PMR15-LF 4.85 oz.
• T-PMR25-LF 4.85 oz.
• T-PMR25-MF 6.70 oz.
• T-PR25-HF 9.35 oz.
• T-PMR40-MF 6.70 oz.
DL2000 Air Vent/Vacuum
Relief Valve
Specifications
■ Part Number: T-YD-500-34
■ Vent closing pressure: 4 PSI
■ Vacuum relief pressure: 4 PSI
■ Maximum operating pressure: 100 PSI
■ Inlet thread size: 1⁄2” MIPT
■ Body dimensions (L x W x D):
1.460” x .980” x .980”
■ Weight: .25 oz.
Compression Adapter
■ Part Number: T-CA-710
■ Minimum operating pressure: 5 PSI
■ Maximum operating pressure: 50 PSI
■ Inlet size: .850” O.D. (solvent-welds to
1⁄2” female slip fitting)
■ Outlet connection size: Accepts .710”
O.D. tubing
■ Body dimensions (L x W x D):
.560” x .970” x .970
■ Weight: .05 oz.
_____________________________________________________________Landscape Dripline Design
■ System Components Specifications
NOTES:
41