Operation Manual

13
3. To reassemble the sensor housing, thread the antenna wire
through the lower housing, exiting the center hole in the
bottom grid.
4. Mate the two halves squarely, aligning the translucent
dome above the mounting bracket.
5. Turn the upper housing counterclockwise to securely
engage the lower housing.
To clear a weak battery alert condition
1. At the controller, press .
2. On ALERTS, press .
3. On the Alerts screen, press to move to the
LOW WS BATTERY alert. Press .
4. You will be prompted to CLEAR ALERT?
Press to change to YES. Press .
Review Screen
e Review screen allows operators to review settings
for the various sensors added to the controller.
1. Press the Review button.
2. Press to the WEATHER SENSOR. Press .
3. Use to scroll through the various sensor settings.
CLEAR ALL
ALERTS
LOW WS BATTERY
SCHEDULE A
SCHEDULE B
AUX 2
RAIN SENSOR
REVIEW
WEATHER SENSOR
WEATHER SENSOR
ADJUST ---
RAIN STATUS WET
SENSOR TEMP 81
°
F
SIGNAL STRENGTH
REVIEW
→