Installation Manual

10
4. Press to CALIBRATE. to START.
to conrm.
5. START will turn to CANCEL.
Over the specied time period (see note above), the soil sensor
will “learn” the 100% mark and transmit that information
to the controller. At the end of the time period, soil sensor
calibration is done.
6. If you have not already directed the soil sensor to control a
schedule (page 8), please do so now.
FREEZE OFF AT
Freeze O is the temperature at which irrigation will be turned
o due to cold temperatures.
1. or raises or lowers the temperature value.
2. Press to input the value.
ID
Displays the ID of the selected soil sensor.
CURRENT TEMP
Displays the temperature of the sensor at ground level (not at
“spike” level).
MOISTURE NOW 100%
LOW THRESHOLD 50%
SIGNAL STRENGTH
BATTERY LEVEL GOOD
CALIBRATE START
SOIL SENSOR
→
START
CALIBRATE
CAL SETTING 5
FREEZE OFF AT
ID 00 59 52
CURRENT TEMP 81
°
F
SOIL SENSOR
39
°
F
→
→