Installation Manual
13
!
For close-cut turf varieties, such as Hybrid Bermuda, the
top of the sensor must be installed at grade level to
prevent damage by mowing equipment.
4. Applying even, downward pressure on top of the sensor,
insert the sensor probes and retention spikes completely
into the soil.
FCC Statement
is equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. ese
limits are designed to provide reasonable protection against harmful
interference in a residential installation. is equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment generates
interference to radio or television reception, which can be determined by
turning the equipment on and o, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
e user may nd the following booklet prepared by the Federal
Communications Commission helpful: “How To Identify and Resolve
Radio-TV Interference Problems”. is booklet is available from the U.S.
Government Printing Oce, Washington, DC 20402. Stock No. 004-
000-00345-4.
Hybrid Bermuda Turf
Tall Fescue Turf