Installation Manual

7
calibration will be set using the next sensor reading
(within 30 minutes).
Additional calibration settings are available. From ‘1’ (~1
day “watch window”) to ‘168’ (~7 day “watch window”).
4. Move to the YES eld after CALIBRATE NOW?
Press . Sensor calibration begins.
5. Press to return to the Home screen. A message on the
bottom of the Home screen indicates that the sensor is
calibrating. e message clears when calibration is nished.
The Soil Sensor Menu
e EVOLUTION® controller’s Soil Sensor menu displays
sensor information as well as allows the user to modify certain
settings.
Navigating the Menu Interface
• Use or to navigate the menu commands.
• To change a value, press or to move to the desired
eld, then press and to adjust the value.
• Press to input the desired value.
Getting to the Sensors Menu
1. Press ADVANCED then .
2. Press to SENSORS. Press .
CAL SETTING 5
CALIBRATE NOW?
ADD/REMOVE DEVICE
YES
TUE
10/29
SCHEDULE A
NOT WATERING TODAY
HOME
SOIL 1 CALIBRATING
11:18AM
→
ZONE RUNTIMES
ZONE DETAILS
SCHEDULE STARTS
SCHEDULE DETAILS
ADVANCED
→
SENSORS
→