Installation Manual

3
1. Rain Sensor Test Pin
Pressing the test pin simulates operation of the Rain Sensor
by transmitting a signal to the Smart Pod.
2. Rain Sensor Adjustment Cap
e Rain Sensor sensitivity is adjustable to suspend
watering at 1/8”, 1/4”,, 1/2” and 3/4” (3 mm, 6 mm, 12
mm and 19 mm) of accumulated rainfall.
3. Solar Collector
Solar radiation and temperature are used by the Smart Pod
to calculate and adjust watering to suit current weather
conditions.
4. Battery Compartment
A 9V Alkaline battery (installed) can provide Weather
Sensor operation up to ve years.
See battery service information on page 9 for additional
information.
5. QuickClip™ Mounting Bracket
e QuickClip bracket design enables the Weather Sensor
to be easily installed and aligned.
6. Antenna
1
2
3
4
5
6
Weather Sensor Overview