Sell Sheet

FLEX800
™
B SERIES GOLF ROTORS
www.toro.com / e Toro Company, Irrigation Division / 5825 Jasmine Street, Riverside, CA 92504 / 877-345-8676 / Specications subject to change without notice / © 2015. All rights reserved / P/N 15-5012-IG
Operating Specifications
• Inlet: 1” NPT or ACME
• Radius:
- FLX35-6B: 42’ – 95’
- FLX35B: 43’ – 90’
- FLX34B: 57’ – 95’
• Flow Rate:
- FLX35-6B : 7.1 – 52.5 GPM
- FLX35B: 8.2 – 56.3 GPM
- FLX34B : 13.0 – 55.4 GPM
• Precipitation Rates:
- FLX35-6B : Minimum - .34”/hr; Maximum - .56”/hr
- FLX35B: Minimum - .37”/hr; Maximum - .67”/hr
- FLX34B : Minimum - .33”/hr; Maximum - .59”/hr
• Recommended Operating Pressure Range: 50-100 PSI
(maximum – 150 PSI and minimum – 40 PSI)
• Check-O-Matic models maintain up to 5’ elevation change
Dimensions
• Body diameter: 6”
• Body height: 8.5”
• Weight:
- FLX34B – 1.98 lbs.
- FLX35B – 2.00 lbs.
- FLX35-6B – 2.05 lbs.
• Pop-up height to nozzle: 3¼”
Nozzle Selection
• Nozzle variations
- FLX35-6B - Nine variations (30, 31, 32, 33, 34, 35, 36, 37 & 38)
- FLX34B - Nine variations (30, 31, 32, 33, 34, 35, 36, 37 & 38)
- FLX54B – Eight variations (31, 32, 33, 34, 35, 36, 37 & 38)
• Back nozzle capability on part circle models standard
- FLX35-6B – one position available
- FLX35B – two positions available
- FLX34B – two additional front nozzle positions
• Main-less capability for short radius applications
• Stator variations - 2
• Radius reduction screw for fine tuning the radius (363-4839).
Standard on FLX35B; optional on FLX34B and not available
on FLX35-6B models
• Ratcheting riser
• Nozzle base clutching – Part circle models
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Specifying Information—B Series
FLX3XB-X2-XXXXE
Series Arc System Thread Type Valve Type Nozzle Optional
FLX3 X B X 2 XXXX E
FLX3 – FLEX800
B Series
4—Full-Circle
5—Part-/Full-Circle
5-6—Part-/Full-Circle
with TruJectory
B—Block 0—NPT
4—ACME
Check-O-Matic
3134— Includes nozzles #31, 32, 33 & 34
3538— Includes nozzles #35, 36, 37 & 38
E—Effluent Model
Example: When specifying a FLEX800 B Series Sprinkler with full circle - NPT threads #34 nozzles, you would specify FLX34B-02-3134
7°
30°
Nozzle Trajectory Provides Unmatched Performance
FLX35-6B with Trujectory
™
adjustment from 7°-30° in 1°
increments and FLX35/FLX34 models with dual trajectory
settings of 25° or 15° provide improved wind performance,
obstacle avoidance and radius adjustment.
FLX35-6B
15°
25°
FLX34B and FLX35B
OR