Sell Sheet

Greensmaster
®
800 Specifications*
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for
sale may vary in design, required attachments and safety features. Consult your local Toro Distributor.
The Greensmaster 800 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
GREENSMASTER 800, MODEL 04054
ENGINE
Subaru
®
Heavy-Duty Industrial, 4.5 HP, OHC, 4-cycle, CARB, EPA, EU certified gasoline engine. Displacement: 7.7 cu in. (126 cc).
Cast iron cylinder sleeve. Electronic ignition. Maximum noise suppression muffler.
FUEL CAPACITY
2.85 quarts (2.7 liters) regular grade unleaded gasoline.
TRACTION AND
IMPLEMENT DRIVE
Engine to countershaft drive: two “A” section V-belts. Timing belts from countershaft to differential, drive drum and reel.
GROUND SPEED
Mowing speed: 1.5 mph (2.4 km/h) to 3.3 mph (5.3 km/h). Transport speed (maximum): 5.0 mph (8.0 km/h).
DIFFERENTIAL
Peerless Series 100.
CLUTCHES
Traction: inside belt idler. Reel: jaw type.
BRAKE
Service/parking-band type.
TRACTION DRUM
Dual cast aluminum, 7.5" (19 cm) diameter.
CONTROLS
Engine mounted; recoil starter, choke. Handle mounted: hour meter, on/off switch, throttle lever, traction engage lever, service/park brake lever. Frame mounted: reel drive
engage lever. Safety devices: neutral interlock system, service/park brake, enclosed drive system. Optional: Operator Presence Control.
HANDLE
Loop style; 1" (2.5 cm) diameter with easy pull pin height adjustment, operator selected.
TRANSPORT TIRES/
KICKSTAND
Optional – Two quick detachable pneumatic tires, 3.00 x 3.25-6. 15 psi (1.03 bars) tire pressure. Kickstand is standard.
REEL CONSTRUCTION
5" (12.7 cm) diameter, 14 carbon steel blades welded to 5 stamped steel spiders. Optional 8-blade & 11-blade reel.
WIDTH OF CUT
18" (45.7 cm)
HEIGHT OF CUT
5/64" to 1" (2.0-25.4 mm)
CLIP
w/Clip Kit
Standard14-Blade: .13" (3.3 mm) .194" (4.9 mm)
Optional 8-Blade: .23" (5.8 mm) .34" (8.6 mm)
Optional 11-Blade: .16" (4.1 mm) .25" (6.4 mm)
BEDKNIFE/BEDBAR
Dual screw “click” adjustment to reel. EdgeMax
TM
Microcut Bedknife standard
GRASS BASKET
Patented design: molded polyethylene, baffled and vented for high efficiency collection.
FRONT ROLLER
Aluminum Wiehle roller standard; 2" (5.1 cm) diameter, .200 spacing.
WEIGHT
210 lbs. (95.3 kg) with aluminum Wiehle roller, kickstand and grass basket, without transport tires and groomer.
CERTIFICATION
Certified to meet ANSI specifications B71.4-2004 and European Community (CE) specifications with required kits installed.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
TRACTION UNIT ACCESSORIES
112-9282 Operator Presence Bail Kit
04266 Push Broom Brush
04123 Wheel Kit
115-1886 Traction Slow Down Kit
65-9000 Clip Kit
04399 Turf Evaluator
115-475 4 Wireless Hour Meter
120-9690
Wire Harness
(For Wireless Hour Meter)
GREENSMASTER 800 ACCESSORIES
BEDKNIFE & BEDBAR OPTIONS
98-7260 Tournament Bedknife
93-4262 Microcut Bedknife
110-2301 Low Cut Bedknife
117-1530 Extended Microcut Bedknife
115-1880 EdgeMax
TM
Microcut Bedknife
117-1532
EdgeMax
TM
Tournament Bedknife
94-9010 Height of Cut Adjustment Bar
120-2731-03 Bedbar – Aggressive
ROLLER & ROLLER SCRAPER OPTIONS
99-6240 Narrow Wiehle Roller (Standard)
98-7264 Wide Wiehle Roller
104-2640 Full Roller
98-7257 Full Roller Scraper
65-8560 Roller Extension
GROOMING OPTIONS
04133 Groomer
04109 Thatching Kit (dynaBLADE)
REEL OPTIONS
98-5919 11-Blade Reel