Sell Sheet

Greensmaster
®
1000 Specifications*
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for
sale may vary in design, required attachments and safety features. Consult your local Toro Distributor.
The Greensmaster 1000 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
TRACTION UNIT ACCESSORIES
04062 LED Light Kit
112-9282 Operator Presence Bail Kit
04266 Push Broom Brush
04123 Wheel Kit
115-1886 Traction Slow Down Kit
65-9000 Clip Kit
115-1880 18-Tooth Pulley
04399 Turf Evaluator
115-475 4 Wireless Hour Meter
120-9690
Wire Harness
(For Wireless Hour Meter)
GREENSMASTER 1000, MODEL 04055
ENGINE
Subaru
®
Heavy-Duty Industrial, 4.5 HP, OHC, 4-cycle, CARB, EPA, EU certified gasoline engine. Displacement: 7.7 cu in. (126 cc). Cast iron cylinder sleeve. Electronic
ignition. Maximum noise suppression muffler.
FUEL CAPACITY
2.85 quarts (2.7 liters) regular grade unleaded gasoline.
TRACTION AND
IMPLEMENT DRIVE
Engine to countershaft drive: two “A” section V-belts. Timing belts from countershaft to differential, drive drum and reel.
GROUND SPEED
Mowing speed: 1.5 mph (2.4 km/h) to 3.3 mph (5.3 km/h). Transport speed (maximum): 5.0 mph (8.0 km/h).
DIFFERENTIAL
Peerless Series 100.
CLUTCHES
Traction: inside belt idler. Reel: jaw type.
BRAKE
Service/parking-band type.
TRACTION DRUM
Dual cast aluminum, 7.5" (19 cm) diameter.
CONTROLS
Engine mounted; recoil starter, choke. Handle mounted: hour meter, on/off switch, throttle lever, traction engage lever, service/park brake lever. Frame mounted: reel drive
engage lever. Safety devices: neutral interlock system, service/park brake, enclosed drive system. Optional: Operator Presence Control.
HANDLE
Loop style; 1" (2.5 cm) diameter with easy pull pin height adjustment, operator selected.
TRANSPORT TIRES/
KICKSTAND
Optional – Two quick detachable pneumatic tires, 3.00 x 3.25-6. 15 psi (1.03 bars) tire pressure. Kickstand is standard.
REEL CONSTRUCTION
5" (12.7 cm) diameter, 11 carbon steel blades welded to 5 stamped steel spiders. Optional 8-blade & 14-blade reel.
WIDTH OF CUT
21" (53.3 cm)
HEIGHT OF CUT
5/64" to 1" (2.0-25.4 mm)
CLIP
w/Clip Kit
Standard 11-Blade: .16" (4.1 mm) .25" (6.4 mm)
Optional 8-Blade: .23" (5.8 mm) .34" (8.6 mm)
Optional 14-Blade: .13" (3.3 mm) .194" (4.9 mm)
BEDKNIFE/BEDBAR
Dual screw “click” adjustment to reel. EdgeMax
TM
Microcut Bedknife standard
GRASS BASKET
Patented design: molded polyethylene, baffled and vented for high efficiency collection.
FRONT ROLLER
Aluminum Wiehle roller standard; 2" (5.1 cm) diameter, .200 spacing.
WEIGHT
220 lbs. (99.8 kg) with aluminum Wiehle roller, kickstand and grass basket, without transport tires and groomer.
CERTIFICATION
Certified to meet ANSI specifications B71.4-2004 and European Community (CE) specifications with required kits installed.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
GREENSMASTER 1000 ACCESSORIES
BEDKNIFE & BEDBAR OPTIONS
93-4262 Microcut Bedknife
108-4303 Extended Microcut Bedknife
93-4264 Low Cut Bedknife
115-1881
EdgeMax
TM
Tournament Bedknife
93-4263 Tournament Bedknife
94-9010 Height of Cut Adjustment Bar
112-9279-03 Bedbar – Aggressive
ROLLER OPTIONS
88-6790 Wide Wiehle Roller
52-3590 Swaged Roller
93-9045 Long Front Wiehle Roller
71-1550 Cast Iron Wiehle Roller
104-2642 Full Roller
65-8560 Front Roller Extension Kit
107-1588 Rebuild Kit
STANDARD EQUIPMENT
99-6241 Narrow Wiehle Roller
115-1880 EdgeMax
TM
Microcut Bedknife
GROOMING OPTIONS
04131 Groomer
105-9640 Groomer Brush Assembly
04109 Thatching Kit (dynaBLADE)
04111 Thatching Kit
SCRAPER OPTIONS
112-9285 Smooth Scraper
112-9288 Wide Wiehle Roller Scraper
112-9286 Scraper Brush
112-9289 Narrow Wiehle Roller Scraper
112-9287 Scraper Comb
REEL OPTIONS
93-6087 8-Blade Reel
117-1449 14-Blade Reel