Accessory Guide

Tournament Bedknife
|
94-5885
• Height of cut range 1/8” to 1/2” (3.2 – 12.7mm)
• Thick blade for longer lasting bedknife
High Cut Bedknife
|
104-2646
• Height of cut range 5/16 to 1/2” (8 – 25.4mm)
• Use on tee boxes, aprons, and other higher
heights of cut
Narrow Wiehle Roller
|
93-9039
• .200” (5mm) groove spacing, Aluminum roller
• Low penetration into turf
Greensmaster 1600
|
04060
• 3.7 HP (2.7 kW) engine
• Wider width of cut and extended cutting
height range for greens, tee boxes, sports elds,
and other formal turf areas
Greensmaster 1600
California CARB Compliant
|
04035
• Adheres to CARB emissions standards
• Only sold in California
Standard Equipment
Low Cut Bedknife
|
93-9015
• Height of cut range 3/16”- 1.0” (4.8 – 25.4mm)
• Thicker blade for longer lasting bedknife
Bedknife & Bedbar Options
Fairway Bedknife
|
107-8181
• Height of cut range 3/8” – 1” (10 – 25.4mm)
• Used for mowing at higher heights of cut in
fairway applications
Microcut Bedknife
|
112-9275
• Height of cut range 5/64”– 3/16”(2.0mm – 4.8mm)
• Optimal for the lowest heights of cut
Greensmaster
®
1600
Accessories
©2009 The Toro Company
8111 Lyndale Ave. S.
Bloomington, MN 55420-1196
Printed in the U.S.A.
Specifications subject to change.
Please contact your Toro distributor for details.
Greensmaster 1600
The Greensmaster
®
1600 has a 26 inch
cutting width and extended height of
cut range making it the perfect mower
for tee boxes, aprons and other formal
turf areas, even large area greens or
sports fields.
The Greensmaster 1600 is equipped with
many attachments and accessories to
ensure you have the right tools to match
any turf conditions.
Aggressive Bedbar
|
112-9278-03
• Designed for firm greens where a more aggres-
sive cut is needed for more aggressive cultivars
• Recommended when reel diameter has worn
down due to extended wear to achieve lower
heights of cut
• Not recommended for use in soft turf conditions
or periods of high stress
Height of Cut Adjustment Bar
|
94-9010
• Adjustment bar used to adjust cutting height
High Height of Cut Bar
|
99-4286
• Allows for higher heights of cut, up to 1½”
(38mm)