Articles

explains. “It was really a nice, smooth
cut. One of the benefits of the new
design on that reel was that the attitude
angle stayed the same, no matter how
much wear the reel had on it.”
At Barton Creek, they typically mow
their greens to an eighth of an inch (3.2
mm), and sometimes lower. To ensure
consistent quality of cut, Hudgins and
his staff are very thorough in their pre-
ventive maintenance, constantly checking
and adjusting the mowing equipment.
“Our objective is to have the perfect
product out there, and to not have our
cuts looking off,” Hudgins says.
“In our area of the country, being
Bermuda, and with the ultra-dwarfs that
are out there, everybody is going to lower
and lower heights of cut. It’s the same
way with bents. Everybody wants lower
heights to get that speed,” he adds.
“Of all the cutting units I’ve seen Toro
come out with, they’ve probably done the
best job on this one, in my estimation,”
says Hudgins. “With the new grasses, it’s
going to be a definite benefit.”
“It gave a super cut,” agrees Bill Perry.
He’s the Equipment Manager at the 18-
hole Glendale Country Club in Bellevue,
Washington — another test course for
the prototype cutting unit.
“I also didn’t have to adjust them,
because they didn’t need it,” Perry adds.
“I think Toro is really ahead of the curve
with this one.”
The Next Generation
Some of the technology behind the
new cutting unit is not exactly new; Toro
has applied a great deal of its existing
knowledge and experience gained from
the popular Greensmaster Flex™ 21
walking greensmower.
“We broke new ground in effective
heights of cut when we introduced the Flex
21,” says Helmut Ullrich, Toro’s Product
Manager for greensmowers, “but there was
no rider on the market that could be inte-
grated into that program. Now all of our
riding greensmowers will be able to provide
an excellent quality of cut down to 1/16
inch (1.6 mm).
“They performed like a walking greens-
mower,” observes Steve Kealy, Super-
intendent of the Glendale Country Club
in Washington. “The cut was more uni-
form, and it seemed like they floated bet-
ter over the undulations, with no scalp-
ing. The quality of cut was very high, and
we were mowing at .110 (2.8 mm),
which is pretty low.”
Benefits Beyond Cutting
By making the new cutting unit back-
ward-compatible, that means any existing
piece of Toro riding
greensmower equipment
can be retrofitted and
improved.
“That gives us end-users
different options,” says
Barton Creek’s Hudgins.
“Instead of buying a whole
new machine, if you’ve got
one that’s in pretty good
shape, this gives you a way
to upgrade your reels.”
“While a superintendent
will appreciate what this
cutting unit can do in the
grass, the technicians will
appreciate the new design
even more,” explains Toro’s
Ullrich. “The simplicity is
the first thing they’ll notice. They won’t
have to level the rollers or crawl under
the machine to grease the center unit
anymore.”
The precision-manufactured, bolted,
die-cast aluminum frame has greater tor-
sional rigidity, so it holds adjustment and
maintains constant cutting-edge pressure.
That eliminates the need for routine
squaring-up or leveling of the unit.
“The bedknife and the height of cut
are the only adjustments required,” adds
Ullrich, “and the bedknife/bedbar assem-
bly drops out easily for grinding.”
With the new unit’s sealed roller and
reel bearings, it also eliminated any zerks
and the need for greasing.
“The fact that it doesn’t require the
maintenance and the greasing is just fan-
tastic,” says Riverbend’s Superintendent
Petersen. “It’s nice not having to do that.
We went six months and we never
greased them. Try doing that with an
older unit. Also in that six months with
those units, we never had to replace a
bedknife on them.”
All You Could Ask For
When you look at everything that
Toro’s new cutting unit offers — better
quality of cut at lower heights, no zerks,
minimized adjustments, easier mainte-
nance, and more — it’s hard not to get
excited. Then when you consider that
the cutting unit can be added to existing
pieces of greensmowing equipment, it
just sounds better all the time.
“They’re great,” sums up Glendale’s
Kealy. “They work like a million bucks.”
The new cutting system — part of the
Toro Greensmaster equipment line — was
officially introduced this February, but
the news about it is already spreading
fast. This cutting unit will definitely be a
big step up for a lot of courses.
“Basically, Toro is raising the bar,”
Petersen says. “This is what’s going to be
next on cutting units on greensmowers.”
Refer to page 12 of this issue for correct
setup and operation of the new
Greensmaster cutting unit.
3
Lower heights and superior quality of cut result from the new
cutting unit for riding greensmowers.
Unit
22109ToroAdv_Issue_7.qxd 6/27/03 9:56 AM Page 3