Specifications

43
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
GREENSMASTER 800, MODEL 04054
ENGINE
Subaru
®
Heavy-Duty Industrial, 4.3 hp, OHC, 4-cycle, CARB, EPA, EU, China certified gasoline engine with integral lighting coil. Displacement: 7.7 cu in. (126 cc).
Cast iron cylinder sleeve. Electronic ignition. Maximum noise suppression muffler.
FUEL CAPACITY
3.17 quarts (3.0 liters) regular grade unleaded gasoline.
TRACTION AND IMPLEMENT DRIVE
Engine to countershaft drive: two “A” section V-belts. Timing belts from countershaft to differential, drive drum and reel.
REEL DRIVE
Positive drive belt powered reel. Manually activated jaw-type clutch provides drive engagement/disengagement.
GROUND SPEED
Mowing speed: 1.5 mph (2.4 km/h) to 3.3 mph (5.3 km/h). Transport speed (maximum): 5.0 mph (8.0 km/h) with transport tires installed.
DIFFERENTIAL
Peerless Series 100.
CLUTCHES
Traction: inside belt idler. Reel: jaw type.
BRAKE
Service/parking-band type.
TRACTION DRUM
Dual cast aluminum, 7.5" (19 cm) diameter.
CONTROLS
Engine mounted; recoil starter, choke, fuel shutoff. Handle mounted: hour meter, on/off switch, throttle lever, traction engage lever, service/park brake lever,
on/off light switch (optional). Frame mounted: reel drive engage lever. Safety devices: neutral interlock system, servicing/park brake, enclosed drive system.
Optional: Operator Presence Control.
HANDLE
Loop style; 1" (2.5 cm) diameter with easy pull pin height adjustment, operator selected.
TRANSPORT TIRES/KICKSTAND
Optional – Two quick detachable pneumatic tires, 3.00 x 3.25-6. 15 psi (1.03 bars) tire pressure. Lift assist kickstand is standard.
REEL CONSTRUCTION
5" (12.7 cm) diameter, 14 high-carbon steel blades welded to 5 stamped steel spiders. Optional 11-blade reel.
WIDTH OF CUT
18" (45.7 cm)
HEIGHT OF CUT
1/16" to 1.25" (1.58-31.75 mm)
CLIP
Standard w/Clip Kit
Standard14-Blade: .13" (3.3 mm) .194" (4.9 mm)
Optional 11-Blade: .17" (4.3 mm) .25" (6.4 mm)
BEDKNIFE/BEDBAR
Dual screw “click” adjustment to reel. EdgeMax
TM
Microcut Bedknife standard
GRASS BASKET
Patented design: molded polyethylene, baffled and vented for high efficiency collection.
FRONT ROLLER
Aluminum Wiehle roller standard; 2" (5.1 cm) diameter, .200 spacing.
WEIGHT
216 lbs. (97.9 kg) with aluminum Wiehle roller, kickstand and grass basket, without transport tires and groomer.
CERTIFICATION
Designed in accordance to ANSI specifications B71.4-2012 and European Community (CE) specifications with required kits installed.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
Greensmaster
®
800 Series Specifications
*
* Specifications and design subject to change without notice. Products depicted in
this literature are for demonstration purposes only. Actual products offered for sale
may vary in use, design, required attachments and safety features. Consult your local
Toro Distributor.
The Greensmaster 800 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
TRACTION UNIT ACCESSORIES
112-9282 Operator Presence Bail Kit (ANSI/CE req.)
04266 Push Broom Brush
04123 Wheel Kit
115-1886 Traction Slow Down Kit
65-9000 Clip Kit
115-4754 Wireless Hour Meter
120-9690 Wire Harness (For Wireless Hour Meter)
117-0073 High Altitude Kit
04062 LED Light Kit
GREENSMASTER 800 ACCESSORIES
BEDKNIFE & BEDBAR OPTIONS
117-1530 EdgeMax
TM
Microcut Bedknife
98-7261 Microcut Bedknife
110-2300 Extended Microcut Bedknife
117-1532 EdgeMax
TM
Tournament Bedknife
98-7260 Tournament Bedknife
110-2301 Low Cut Bedknife
120-2731-03 Bedbar – Aggressive
ROLLER & ROLLER SCRAPER OPTIONS
99-6240 Narrow Wiehle Roller (Standard)
98-7264 Wide Wiehle Roller
104-2640 Full Roller
65-8560 Roller Extension
98-7257 Full Roller Scraper
121-2617 Wide Wiehle Scraper
99-6239-01 Narrow Wiehle Scraper
121-2616 Scraper Brush
GROOMING OPTIONS
04133 Groomer
04134 Groomer Drive Reverse
125-3451 Forward Rotating Kit
120-2742 Grooming Brush
04268 Greens Perfection Brush – Soft
04269 Greens Perfection Brush – Stiff
04280 Spring Steel Grooming Reel
04281 Carbide Grooming Reel
04282 Spiral Brush Grooming Reel
04740 Thin Blade Grooming Reel
REEL OPTIONS
127-2160 11-Blade Reel
TOOLS
04399 Turf Evaluator
125-5610
Paper – Reel
125-5611 Shim – Reel
94-9010 Height of Cut Bar Assembly